Exporting Data from Regional MLS -  West Palm Beach, FL

Using the Column Manager to setup the Export Format

Before you can export data, you must first setup the Export format.  This is a one time action that you will need to do.  The format must be setup exactly as shown in this section for the Buying Pattern application to understand the format.  

Press the Column Manager graphic  (as show above) to access the Column Manager.  Once you’ve pressed the graphic you will see a dialog box as shown below. 

Press the “Create new column report” to setup the Export Format needed.  When you press this link, you will see a screen as shown below.

First place the name “Focus 1st” as the “Grid Name as shown above.  Then you will need to define the fields to be in the new Grid (also referred to as Column Report).  To define the fields, select a field from the left table (shown as “Available Items” and press the  key.  You will see the item move to the table on the right. 

Do this for each of the options as shown in the list below. 

Note: Be sure that you create the column report as shown above with the items shown in the list below:


Address (Address)

Bedrooms (BR)

City (City)

Expire Date (Exp Date)

List Date (List Date)

List Price (List Price)

Liv Area Sq Ft (liv SF)

Market Time (DOM)

ML # w Letter Prefix (ML# w letter prefix)

Property Type (Prop Type)

Sold Date (S Date)
Sold Price (S Price)

Status (Status)

Status Change Date (St Chng Date)

Sub Type (Sub Type)

Subdivision Name (Subd Dev Name)

Total Baths (Ttl Bth)

Year Built (Year Built)

Once you have completed the task above, save the results by pressing the  button.  You are now ready to do your MLS search and export results. 

Regional MLS

In selecting data from Regional MLS, be sure to select the option below:

Make sure that all the status options are selected.  This option will make sure that all the data that is needed to create the appropriate graphs, is collected.  

You should also make your normal selection choice by selecting other options that you would normally select in doing a CMA.  As mentioned earlier, looking at activity in specific subdivisions is a good starting point. 

To avoid downloading unnecessary data, you may select only sold, withdrawn, and expired data after a more recent data.  “01/01/2007” would be a good date if you are looking doing your search in 2008 (since only the last two years are used).  However, be aware, that if you place a date in the “expired date” field, the full results are not download.  Thus, make sure you leave the expired date field empty. 

Once you’ve selected the search criteria, press the  button to see the results as shown below.  Now you are ready to download the results.  To download the results, select the  button (Next to the “Export Data” as shown below. 

When you select the download button, the dialog shown below is displayed.  Select the “All Records” option and the “Comma Delimited” Data Export format.  Then push the  button. 

Next you will see the screen shown below.  Select the “Focus 1st” Export Grid Format (by using the drop down box) and check the “Include Column Headers” as shown below.  Then press the  button. 

The download will now start.  Once the download starts, you will be asked if you want to save the file.  Select the save option and then choose a file name. 

Be sure to include the “Include Column Headers?” option.   Also, be sure to remember where you save your file.  This is the exported file that will be used to create your graphs. 

You will see dialog boxes similar to what you see below.

Once you have saved your exported file, you are ready to run the Neighborhood Buying Patterns application. 

When you run the application you will need to point to the exported data file, so make sure that you’ve placed the file in an easy to find place.  

For instructions on how to run the Neighborhood Buying Pattern application, be sure to see the Neighborhood Buying Pattern manual (installed on your desktop when you installed the application).